Ksb pump drive manual

The manual describes the proper and safe use of this equipment in all phases of operation. The name plate indicates the type series and size, the main operating data, the order number and the order item number. The order number and order item number clearly identify the pump set and serve as identification for all further business processes. closed-loop control purposes for each frequency inverter in a single-pump The GSDML file can be downloaded from the KSB web site. The frequency inverter is defined as a slave of the Drive device type and can be addressed by a class 1 or class 2 PROFINET master.  · Motor directly fitted to the pump via a flange or a drive lantern. Discharge line. The pipeline which is connected to the discharge immediately contact your nearest KSB service centre to maintain the right to claim under warranty. General assembly drawingSub-supplier product literatureSectional drawing of the pump. 1) Operating manuals.

local KSB partner. Frequency converters of enclosure type T7 (– V) are UL certified for only – V. The frequency converter complies with ULC thermal memory retention requirements. For more information, refer to the section Motor Thermal Protection in the VLT® AQUA Drive FC Design Guide. This manual contains general installation, operating and maintenance instructions that must be observed to ensure safe pump operation and prevent personal injury and damage to property. The safety information in all sections of this manual must be complied with. This manual must be read and completely understood by the responsible specialist. taken into account in this operating manual. Intended use. The pump (set) must only be operated within the operating limits described in the other applicable documents. (ð Section , Page 6) Only operate pumps/pump sets which are in perfect technical condition. Do not operate the pump (set) in partially assembled condition.

temperatures the pump causes to develop at the motor flange and motor shaft are permitted by the motor manufacturer. The motors fitted by KSB on pumps with. In the event of damage, contact your nearest KSB service centre immediately to surface of the pump casing, at the shaft seal and in the bearing areas. Subject to technical modification without prior notice. © KSB Aktiengesellschaft, Frankenthal Complete pump set consisting of pump, drive.